RLK133 Lock Nut Bearing Standard Shaft Locking Device

Products Features

The kind of this clamping shaft coupling is sensitive and in any case need to use the right method and the

right tools. In the process of storage, transportation and installation, the parts of bearings should not be

damaged. Some bearings require greater pressure, so special tools are needed. Be sure to refer to the

car manufacturing instructions. When installing bearings, they should be installed in a clean and tidy

environment. Small particles entering bearings will also shorten the service life of bearings. It is very

important to keep a clean environment when replacing bearings. It is not allowed to knock the bearing

with a hammer, and pay attention to the bearing not falling to the ground (or similar improper handling).

Before installation, the condition of the shaft and bearing seat should also be checked. Even tiny wear

will lead to poor fit, resulting in early failure of the bearing.

Centres the shaft to the hub

High transmissible torques

Short axial width

For shaft diameters between 20 mm and 200 mm

Disassembly method

1. After confirming that there is no load, loosen the bolts slowly, but do not screw out all the bolts.

2. Screw the removed bolt into the auxiliary threaded hole of the front pressing plate, screw the bolt against the upper pressing plate until the locking assembly is loose, and then gently tap and pull the bolt to pull out the expansion connecting sleeve

Products Parameters

Changzhou Tianniu Transmission Equipment Co., Ltd is a professional one way clutch bearing supplier, the primary products are micro electromagnetic clutch, torque limiter coupling, sliding shaft coupling, flexible propeller shaft coupling, locking assembly and shaft couplings, etc.

We have been in shaft coulpling and clutch one way bearing industry for more than 10 years, persisting in the business principle of products tailored to requirements from clients. We service through listening to our customers, applying innovation and building with craftsmanship to meet all their needs.

Our Products

Full range of shaft coupling products supply

We have been in Sprag Clutch Bearing and clutch one way bearing industry for more than 10 years, persisting in the business principle of products tailored to requirements from clients. We service through listening to our customers, applying innovation and building with craftsmanship to meet all their needs.

With a wide range, good quality, reasonable prices, stylish design and accepting OEM, our products are extensively used in mining machine equipment, convey equipment, reducer and many other industries.With well equipped testing facilities and strict quality control, Changzhou TIANNIU Transmission Equipment Co., Ltd's products sell well all over the world, the main markets are European, America, Canada, Brazil, India, Asia, etc . It was a certified enterprise with Quality Management System ISO9001:2015, SGS , Safety Certificate of Approval for Mining Products.

Exhibitions

Open to customers from all over the world

We welcome clients from all over the world to seek help from us and we look forward to becoming your long-term and stable shaft coupling manufacturer in China.